Clean space construction

Dust removal

Static elimination

Monitoring and control

Medical-related or others

Continuous film / sheet Panel / Sheet-fed film Tray / Jig Wire / Tube

Particular workpiece

Vacuum Adhesive

Particular Work Piece Cleaner

NEW	O-RING TRINC	Features	Applications
	TAS-6811 ORING	•Cleaning of large number of O-rings •High dust removal performance •Prevention of re-adhesion	•O-RING cleaning
	Removal of O-ring foreign matter. Seal failure is prevented.

▼For more information Catalog request CAD data request Inquiry

O-RING TRINC
TAS-6811 ORING

Removal of O-ring foreign matter. Seal failure is prevented.

Features		Applications
■Powerful ionizing ■Air blown dust is collected completely ■Removing dust with a robot in a lamp ■Prevention of dust adhesion inside factory ■Equipped with a static ionizer		■O-ring production/inspection process

TRINC's discharge needle has a long life. TRINC products have an easy maintenance such as one-touch cleaning and auto-cleaning, but sometimes users tend to forget to clean the needle. When the ionizer has been used for long time, discharge needle has come worn out and effectiveness of static elimination may reduce. The periodical exchange of needle is recommended.

An O-ring is an important mechanical element that connects two mechanical elements and has a fluid flowing through them without leakage. However, if dust (foreign matters) adheres to the O-ring, a poor sealing could cause the fluid to leak. So, dust has to be prohibited on the O-ring. Though the O-ring loathes dust like this, it has also a weak point that it is weak against dust as well. The reasons for this are as follows ;
(1) It is made of rubber system.
(2)Since oil is applied to the surface, it is easy to adsorb dust.
(3)The dust once adhered is difficult to remove.
(4)When blowing from above the O-rings piled up high, the dust would further go nside.
Because taking care of O-rings from dust is so difficult, there have been no suitable countermeasures to date. In this instance, we have developed a dry cleaning device "O-RING TRINC" that solves these problems.

Feature 1

Powerful cleaning: A strong ion air blow removes the dust adhering to O-rings as it removes the static charged on them, so that the dust removal rate reaches 90%.

Feature 2

Adopting a robot: Since the robot automatically performs the dust removal work, manual work is unnecessary.

Feature 3

Air blown dust is collected completely: All dust removed from the O-ring are to be collected so as not to pollute the environment inside the factory.

Feature 4

Prevention of dust adhesion inside factory: Because it operates within the clean environment created by CLEAN DESKTOP TRINC, the dust coming out from workers and floating in the factory do not reattach.

Feature 5

Longer filter operation life: Due to the internal air circulation system, filter fouling is less and maintenance frequency is drastically decreased. Running costs can be reduced.

Feature 6

Filters replaceable at ease at the front face without tools: The filters included on the left and right wings can be replaced easily without tools at the worksite.

Feature 7

Equipped with a static ionizer: Because the static charged on 0-rings is removed by the ionizer, dust is easy to remove and no new dust adherence occurs.

Feature 8

Compact: It is compact so it can be used on a working desk. The wind engine that can be a source of vibration and noise is located under the workbench so as to make the work space wider and keep the working environment comfortably .

▲Close information Catalog request CAD data request Inquiry

CUP TRINC	Features	Applications
TAS-1217 CUP	•High dust-removal performance •Automatic cleaning of stacked cups. •Collection of dust blown off	•Cup cleaning
Removal of foreign substances from cups. Prevention of foreign substances from mixing in foods.

▼For more information Catalog request CAD data request Inquiry

CUP TRINC
TAS-1217 CUP

Removal of foreign substances from cups.
Prevention of foreign substances from mixing in foods.

Features		Applications
■Powerful ionizing ■Air blown dust is collected completely ■Removing dust with a robot in a lamp ■Prevention of dust adhesion inside factory ■Equipped with a static ionizer		■Removing foreign substances adhering to the inside and outside of the cup

Foreign substances are enemies for containers containing various foods such as ice cream and instant noodles. Because they are put in mouth, foreign substances are not permitted sanitarily so strictly managed at the production plant. In reality, however, unexpected situations such as a hair being detected in the food and cockroach's feet being found in the food have been happening. One of the causes is foreign substances in the container (cup). They may have entered somewhere in the cup before filling the food. So at the food factory, it is necessary to clean the cup before filling the food as a self-defense strategy. In general, containers (cups) are distributed in a superimposed form for bulkiness. How to sweep off the foreign substances contained in the superimposed cups is a technical challenge. In order to solve this problem, TRINC has developed a new product "CUP TRINC." TRINC has completed a technology to cleanly remove foreign substances adhering to the inside and outside of the cups superimposed about 60 by its unique structure. The foreign substances removal rate has reached 95% or more. It is a result of utilizing its vaunted static electricity removal technology, an ultra-clean clean bench technology and ultra-clean air blow technology. TRINC wishes this development will become good news for people who have suffered from foreign substance problems including food factories.

Feature 1

Cleaning about 60 superimposed cups at once: About 60 superimposed cups (up to 400mm) can be cleaned at once by an unique structure.

Feature 2

Cleaning the inside and outside of the cups at once: Cleaning inside and outside the cup at the same time

Feature 3

Ultra clean: (1) Using ultra-clean air cleaning with ultra-clean air filtered 99.99% of ultra-fine foreign matters sized 0.01mm.
(2) Simultaneously removing static electricity and foreign matters using ionic air Ionizer "No-Leak SPOTRINC" is used, cleaning while re moving static electricity by adopting TRINC’s No-Leak technology.

Feature 4

With clean bench: (1) Operate in the clean bench
Adopting ultra-high performance Clean Desktop TRINC, it operates in ultra-clean space, completely preventing the dust leaking out of workers and the dust floating in the factory from re-adhering to the objects.
(2) Foreign substances not scattered in the factory
The foreign substances brushed off of the cups are all collected by itself so as not to pollute the surrounding environment. To do so, it prevents secondary disasters

Feature 5

Adopting a robot: Since a robot automatically performs the dest removal work, it can save the manpower.

Feature 6

Space saving: Because of compact desktop type, it can be installed on a work bench.

Feature 7

Power saving: The power consumption of the main unit is only 133W. Even with a clean bench, it consumes 550W of power.

▲Close information Catalog request CAD data request Inquiry

Product Informatoin

Particular Work Piece Cleaner