PRODUCTS

TRAY CLEANER
Dust cleanerTray and Jig

TRAY CLEANER

HIGH VERSATILITY MODEL 700
 TAS-1778 TRAYC-V-0700
 TAS-1779 TRAYC-V-0700-MB (WITH MONTING BASE)

HIGH VERSATILITY MODEL 500
 TAS-1778 TRAYC-V-0500
 TAS-1779 TRAYC-V-0500-MB (WITH MONTING BASE)

TRAY CLEANER 500
 TAS-1776 TRAYC-0500
 TAS-1777 TRAYC-0500-MB (WITH MOUNTING BASE)

Non-contact automatic cleaneroptimized for trays Easy, powerful,and uniform cleaning without manual labor

Features
High dust-removing performance
High versatility
High speed continuous cleaning
Not polluting the environment
Built-in conveyance mechanism
Applications
Electronics & Electronic Components
Rubber / Plastics
Chemicals & Pharmaceuticals

Feature details

Dust Removal x Statlc Ellmlnatlon for Ultra-Clean Trays of Any Shape

Powerfully cleans trays of various materials, shapes, sizes, and heights used for electronic components, semiconductors, optical components, medical devices, food products, and more, protecting the contents from foreign matter. With no other means available for removing dust from trays with complex shapes, this product supports the labor savings, reduced staffing, and automation of tray cleaning that previously had to rely on manual work.

Dust Removal x Statlc Ellmlnatlon for Ultra-Clean Trays of Any Shape

Thoroughly removes and collects foreign matter attached in pocket recesses and intricate undersides

Trays become ultra-clean in a short time
A proprietary multi-stage air blow dust removal method combined with powerful static elimination achieves uniform cleaning for trays with complex pocket shapes and various sizes, depths, and pitches. Cleaning is completed in just a few seconds while being conveyed.

Stays clean even after processing
Unlike manual air blowing by an operator, dislodged particles are promptly collected, so dust is not scattered inside or around the unit. In addition, since static electricity has been removed from the tray after processing, there is no risk of environmental particles being attracted and reattaching.

Thoroughly removes and collects foreign matter attached in pocket recesses and intricate undersides

Simultaneous Two-Sided Cleaning

Both sides are processed simultaneously while the tray is conveyed. Even the underside of trays with intricate, complex structures can be cleaned as evenly as the top surface. There is no risk of foreign matter transferring to the tray below, even when trays are stacked.

Simultaneous Two-Sided Cleaning

Reliably removes even foreign matter firmly attached by static electricity

High-concentration ion air blowing effectively removes foreign matter that has become firmly attached by static electricity. The finer the particles, the harder they are to remove once attached by static charge, but the TRINC lonizer's high-concentration ions are effectively infused into the air blow to overcome this problem.

Supports large and heavy trays , High-Speed Cleaning

A more powerful air blower engine now enables strong cleaning of trays up to 700mm (27.56") wide. In addition, a reinforced conveying system supports cleaning of heavy trays weighing up to 1.2g/cm2.

Achieves a conveyor speed of 500mm/sec, enabling high-speed cleaning of up to 3,600 trays per hour. Because the process is completely dry, no drying step is required, allowing for both shorter processing times and lower costs.

Supports large and heavy trays , High-Speed Cleaning
The industrially used trays for storing items are very useful and appreciated, not only for electronics, but also for resin loading, storing, and transporting products and materials in every field of food, medicine, resin molded products, etc. They can store items in order and be put together very compactly by stacking them when empty after use. So when they are transferred, transportation costs can be saved to the minimum, which is very convenient. However, in recent years, manufacturing factories are apt more to be strictly required to produce clean products in the clean environment. So what is problem here is the dust adhering to the tray. Since the tray is placed on the desk or table, dust on the table always adheres to the bottom of it. When the trays become empty after use, they are stuck, so that the dust adhering to the bottom of one tray is transferred to the surface of other trays. Thus, while the tray is convenient, it has been acting negatively as a dust carrier. Therefore, before the trays are overlaid, the foreign matter adhering to the bottom must be removed (cleaned). As a cleaning method, there are wet (water-washing method) and dry (air blow method) cleaning methods. While the wet method requires a large-scale equipment, the dry method can afford to be a small-scale one. Because the dry cleaning exercises “blowing out air then to suck in it again,” it seems to be so simple. But truth to tell, the conventional system for it is impossible to do a complete cleaning. And also it is hard to do cleaning thoroughly for those various shaped trays. This is because it has a defect in principle. TRINC has developed a new dust-removal principle and thereby has completed a new tray cleaner that is both versatile and compatible with advanced dust removal performance.
 
Thoroughly removes static electricity and dust from trays



 

Product number (model number/format)

TAS-1778 TRAYC-V-0700
TAS-1779 TRAYC-V-0700-MB (WITH MONTING BASE)
TAS-1778 TRAYC-V-0500
TAS-1779 TRAYC-V-0500-MB (WITH MONTING BASE)
TAS-1776 TRAYC-0500
TAS-1777 TRAYC-0500-MB (WITH MOUNTING BASE)

CONTACT US