Super easy maintenance by models with one-touch cleaner |
|
No matter which type you use, AC or DC, a static eliminator tends to attract dust around its needles due to the high voltage applied to them, leading to a lower ion generation if they are not cleaned periodically.
For those conventional static eliminators, cleaning of needles has been burdensome work.
And what is worse, the ionizers are often located not within reach of operators and left uncleaned.
As a result, factory management has been suffered greatly from a high defect fraction caused by the reduced ionizing performance. TRINC has developed a needle cleaning system to solve this problem, which enables to clean dozens of needles at once with one touch of turning a grip at ion bar end. That is the world’s first convenient system and patented. |
|
Automatic needle cleaning by models with automatic cleaner ※Made-to-order product |
|
Moreover, there are models coming with the one-touch cleaner system driven automatically.
For those static eliminators located in the room from which operators are kept out to maintain high cleanliness or in the location hard to access,
the needle cleaning can be done automatically. |
|
Complete dust retrieval from needles by models with vacuum cleaning system |
|
The maintenance of ionizer creates a cause of new problem.
A needle cleaning is indispensable to maintain the ionizing performance.
But if it is done inside the clean room, it is equal to scattering dust (a cause of failure) in the room.
TRINC has challenged this contradiction to develop the world’s first vacuum cleaning system for discharge needles.
The dust generated while cleaning the needles is all retrieved with vacuum to be filtered. |
|